Flow and Pressure Adpator

Langham Industrial Controls recognise that there is a need within the Water Industry to measure both flow and pressure at the boundary box. This can be achieved by connecting a manifold meter and dual channel data logger to the Langham Industrial Controls Flow and Pressure Adaptor. This leading edge development allows simultaneous monitoring and analysis of flow and pressure data on customers’ water supply.

The innovative design allows Water Supply Companies to monitor and report according to DG2 requirements and provides vital data to robustly support and prove the outcome of service improvements following investment. The DG2 directive states that the reference level of service is defined as 10 metres head of pressure at the boundary stop tap with aflow of 9 litres per minute. More stringent surrogate measures have historically been applied that may lead to Water Companies over investing and thus providing a better service than may have been required. Langham Industrial Controls Flow and Pressure Adapter will greatly assist Water Supply Companies to ensure that water supply investments achieve desired targets and no more than that.

The Langham Industrial Controls Flow and Pressure Adaptor enables data collection that can be used to support the Water Companies OFWAT Service Incentive Mechanism (SIM) assessments.



Pressure Adaptors

The Boundary Box Pressure Adaptor is fitted into the meter position of a standard Boundary Box to enable the use of a pressure gauge, transducer, or logger.

A bayonet fitting also allows flushing to be carried out simultaneously without the removal of instrumentation.

Caps can be supplied to keep the connectors clean and free from debris.

LIC Boundary Box Adaptor Literature


CALL US ON 01536 724391